|
1, 1.5, 2 and 3 yard Self Dumping Waste Bins and 4 Yard Waste Bin for use with Tele-Handlers & Reach Forklifts by DeSite
1 Yard Self Dumping Waste Bin
Model BB-1
Capacity 1 Cubic Yard
Width 41”
Length 57”
Depth 33”
Weight 650lbs
Finish Anodize and Power Coat
1.5 Yard Self Dumping Waste Bin
Model BB-1.5
Capacity 1.5 cubic yards
Width 66”
Length 57”
Depth 42”
Weight 775lbs
Finish Anodize and Power Coat
2 Yard Self Dumping Waste Bin
Model BB-2
Capacity 2 cubic yards
Width 60”
Length 62”
Depth 36”
Weight 800lbs
Finish Anodize and Power Coat
3 Yard Self Dumping Waste Bin
Model BB-3
Capacity 3 cubic yards
Width 93”
Length 62”
Depth 51”
Weight 1000lbs
Finish Anodize and Power Coat
4 Yard Waste Bin for use with Tele-Handlers & Reach Forklifts
Model BB-4
Width 7’
Depth 5’
Height 4’
Weight 1500lbs
Finish Anodize and Power Coat
DeSite has designed and now manufactures a line of Self Dumping Waste Bins. Waste Bins often receive a lot of abuse in the work place so they need to be built strong. They get hit, dropped and backed into on a regular basis.
We have designed our bins in a way that commonly damaged parts can be unbolted and replaced to save our customers costly repair bills. We offer a premium bin that has been reinforced in all the critical areas. We hope that you will see and appreciate the quality and value of our forklift waste bins.
Here are some of the features that we feel make the DeSite Self Dumping Waste Bins superior to other brands.
Shipping
DeSite bins have a 2” taper to reduce product from wedging in the bin. This makes it possible to sleeve one bin inside another. The bin bases have also been designed with multiple unit shipping in mind. You can ship four times as many DeSite bins in the same footprint space for other designs. This will save you hundreds of dollars in shipping costs alone!
Durability
Other bin designs corner to corner weld the bin panels. DeSite bins CNC form and overlap the edge of our bin panels. Doubling the plate gives the bin double the strength.
Maintenance and Repair
Dump bins are often susceptible to damage and abuse in the work environment. Heating to bend, cutting and welding when repairing bins can be very expensive. We have designed our bins so that external components are bolted on and not welded on. This allows bin parts to be unbolted and replaced when damaged. Replacing damaged parts saves time and increase work place safety.
Bin Latching System
The latching system on self dumping bins is always exposed to forklift damage. We have made the entire assembly a bolt on item that can be replaced rather than repaired.
Dump Rail Assembly
We have designed the dump rail assembly on our bins to be bolted on. Bolting on the dump rails not only allows for multiple bin shipping, but it also allows for the rails to be replaced if they get damaged.
Rope Linkage Post
We bold on our rope linked post due to the fact that it often becomes damages when the forklift comes into contact with it.
Bin Stop Shaft Pins
We have designed our bins to be maintenance friendly. Bin stops are removable which allow the bin to be separated from the base quickly for maintenance and repairs when needed.
Bin Rail Alignment
Beneath the bin you will find two bin rail alignment rods. We have installed these rods to adjust and control the track alignment as the bin is dumping.
Laminated Bin Track
We have welded a track doubler for the bin to run on. This doubles the strength and support for the base where the bin travels.
Bin Dump Angle
DeSite bins have an extended base which allows our bins to rotate further forward than any other bin. This increases the dump angle for better duping with wet or difficult materials.
Four Way Access
We have designed our bin bases to have 4-way access. This allows for better use and mobility in the work place.
For further information call us at 604-308-3782 or visit our website at www.idmcabc.com
|
